Step 8

Now we have a figure with all parts together. On this one that I worked with, there ended up being a fairly large gap due to the ball joint pushing the leg apart. This was due to lack of me building up the other side before I put them in place. Because of that, I chose to putty over all seams and make the combined sides permanent. I left the screw in place just for simulation to show how both side would work saying there is a screw there like the old figures. I'll have one set up that is truly able to come apart on the next step by step.


Click for closer view!

Next -->


BACK


All Rights Reserved. G.I.Joe and all respected property © Hasbro, Inc.